- Buckets, grapples, rotators
- Hydraulic connections
- Hydraulic hose
- Spiral wraps
- Low pressure hoses
- Adapters
- Quick couplings
-
Fittings
- Metric fittings DKOL
- Metric fittings DKOS
- Metric fittings DKM
- Metric fittings JIS
- BSP fittings
- JIC fittings
- ORFS fittings
- Banjo fitting
-
Flange fittings
-
Flange fittings
- Flange fittings 31,8mm (1/2') SAE 6000
- Flange fittings 38,1mm (3/4') SAE 3000
- Flange fittings 41,3mm (3/4') SAE 6000
- Flange fittings 44,5mm (1') SAE3000
- Flange fittings 47,6mm (1') SAE6000
- Flange fittings 50,8mm (1.1/4') SAE3000
- Flange fittings 54mm (1.1/4') SAE6000
- Flange fittings 60,3mm (1.1/2') SAE3000
- Flange fittings 63,7mm (1.1/2') SAE6000
- Flange holder
- Flange sealing
-
Flange fittings
- KARCHER fittings
- Reusable fittings
- Micro
- WEO fittings
- BSP fittings
- Grease nipples
- Hiab fittings
- Ferrule
- Hydraulic pipes
- Hydraulic components
- Oil coolers and fans
- Oil
- Diagnostics
-
Filters
- Filters elements
- Return filters
- Reversible inlet filters
- Suction filters
- Fuel filters
- Non-standard filters
- Air filters
- Accessories for filters
- High pressure filters
- Screw-on filters
-
HYDAC filters
- Pressure elements Optimicron® "D...ON"
- Return elements Optimicron® "R...ON"
- Return elements Optimicron® Power ON/PO
- Pressure elements Betamicron® "D...BN4HC"
- Pressure elements Betamicron® "D...BH4HC"
- Pressure elements "D...W/HC"
- Pressure elements "D...V"
- Pressure elements "DN"
- Return elements Betamicron® "R...BN4HC"
- Return elements Aquamicron® "AM"
- Return elements Betamicron®/Aquamicron® "R...BN4AM"
- Return elements ECOmicron® "R...ECON2"
- Wire mesh "R...W/HC" return elements
- Polyester "R...P/HC" return elements
- Return elements Mobilemicron® "RK"
- Return elements Mobilemicron® "R...MM"
- Stainless steel wire mesh "R...V" return elements
- Return elements "RN"
- Suction "RS...W" elements
- Spin-on elements "MA"
- Hydraulic accumulator
- Cylinders protections
- Hydraulic cylinders
- Hydraulic cylinder parts
- Hose clamps
- Hydraulic power packs and spare parts
- Pressure gauges and fittings
- Bronze bushes
- Steel bushes
- Bronze bushes with collar
- Hydraulic pump and motors
-
High Torque Orbital Hydraulic Motors
- MM - type OMM BMM J-series
- MP - type OMP BMP MCH H-series
- MR - type OMR BMR MCS S-series
- MS - type OMS BMS MC2 2000-series
- MT - type OMT BMT MC4 4000-series
- MV - type OMV BMV 6000-series
- Spare parts of hydraulic motors
- Seal kits
- MH - type OMH BMH
- MRB - two shafts, for trailers
- Parker TC TB TE TJ TF TG TH TL
- EATON Char-lynn J S M02 M04 M06 series
- MSS - type OMSS BMSS MC2 2000-series bearingless
- Saw head motors
- Gear motors
- Bent axis piston pumps, 12 cc - 172 cc
- Piston pumps, 14 cc - 100 cc
- Group 1 - Gear pumps, 0.89 cc - 9.78 cc
- Group 2 - Gear pumps, 4 cc - 31 cc
- Group 3 - Gear pumps, 19 cc - 72 cc
-
High Torque Orbital Hydraulic Motors
- Hydraulic valves and distributors
-
In line valves
- DOUBLE PILOT OPERATED CHECK VALVES VBPDE
- SINGLE PILOT OPERATED CHECK VALVES VBPSE
- PRESSURE REDUCING VALVES VRP
- CHECK VALVES VU
- OVERCENTRE VALVES DUAL
- RELIEF VALVES VMP
- DUAL CROSS RELIEF VALVES VAU
- 2 WAY FLOW DIVIDER
- FLOW REGULATOR VALVES
- End stroke valves VFC
- PLOUGH OVERTURNING VALVES VRAP
- SEQUENCE VALVES VS2C
- Other valves
- TWO PUMP “HI-LOW” UNLOADING VALVES VABP
- Shuttle valves VU
- OVERCENTRE VALVES SINGLE
- Flow divider
-
CETOP NG distributors
- CETOP-3 NG-6 type valves
- CETOP-3 NG-6 type subplates, manifold blocks
-
CETOP-3 NG-6 type solenoid operated valves
- 4/2-way, P-A and T-B neutral position
- 4/2-way, atviru centru neutral position, and X
- 4/2-way, atviru centru neutral position, and II
- 4/3-way, open center P-A-B-T
- 4/2-way, P-B and T.A. neutral position, and P-A andT.B.
- 4/2-way, P-B and T-A neutral position
- 4/2-way, closed center on neutral position, and X
- 4/3-way, closed center P.A.B.T.
- 4/3-way, P.A. closed, B-T ports connected
- 4/2-way, ( A.B-P.T )-( B.A-P.T )
- 4/2-way, P-A and T-B neutral position, and H
- 4/2-way, ( P.A-B-T )-( P-B.A-T )
- 4/3-way, P. closed, A-B-T ports connected
- 4/2-way, P-T ports connected, and II
- 4/3-way, P-T ports connected
- 4/2-way, closed center on neutral position, and II
- Mechanical control
- 4/2-way, II and closed center
- 4/2-way, ( P-A-B.T )-( P-B.A-T )
- 4/2-way, ( P-B.A-T )-( P-A-B.T )
- 4/2-way, P-A and T.B. neutral position, and P-B and T.A.
- CETOP-5 NG-10 type valves
- CETOP-5 manifolds
- CETOP-5 NG10 type solenoid operated valves
- CETOP-2 NG-4 type solenoid operated valves
- CETOP-7 NG16 Valves and blocks
- CETOP-3 NG-6 spare parts
- Monoblock valves
- Sectional valves and sections
- Control valves for forestery trailers
- Front loaders distributors and kits
- Gear flow dividers
- Spare parts of distributors Danfoss
- Standart (Cartridge) valves
- Spare parts of distributors HIAB
- Spare parts of distributors Walvoil
- Joysticks and control cables
- Spare parts of distributors Atlas
-
In line valves
- Hydraulic parts for trucks
- Tail lift parts
- Hydraulic tanks
- PTO - power take off for trucks
- Tipper and trailer parts
- Hyva components
- Pneumatics
- Valves and distributors
- Quick push-in connectors
- Seals and seals production
- Wipers
-
Piston seals
- Piston seals TPM
- Piston seals TPL
- Piston seals TPS G
- Piston seals TPS T
- Piston seals TDE
- Piston seals PDE
- Piston seals TTU
- Piston seals TTE
- Piston seals TTW
- Piston seals GER
- Piston seals GUA
- Piston seals TGU
- Piston seals TEOL
- Piston seals TTO
- Piston seals TTQ
- Piston seals CUT
- Piston seals PDH
- Piston seals PDP
- Piston seals TSE
- Piston seals TRU
- Piston seals TTD
- Piston seals GDE
- Piston seals GDEM
- Piston seals GUM
- Piston seals PDEP
- Rod seals
- O-rings X-rings
Hydraulic pump and motors
Non standart pumps
- High Torque Orbital Hydraulic Motors
- Gear motors
- Bent axis piston pumps, 12 cc - 172 cc
- Piston pumps, 14 cc - 100 cc
- Group 1 - Gear pumps, 0.89 cc - 9.78 cc
- Group 2 - Gear pumps, 4 cc - 31 cc
- Group 3 - Gear pumps, 19 cc - 72 cc
- Tandem pumps and parts
- Pump Flanges
- Steering units
- Low pressure connections for pumps
- Gear pumps Group PTO-4 ISO
- Gear pumps UNI-3
- Support for gear pumps, Borelli
- Pumps and motors - spare parts
- Tractor pump
- Pumps for working shaft
- Gearbox Multiplicator
- Piston hydraulic motors
- Non standart pumps
- Cluch
- Couplings, Gears
- Piston pumps, variable
- Hand pumps and tanks
- Vane pumps
- Hydraulic pumps - Hydraulic motors
- High pressure water pump
- Home
- Hydraulic pump and motors
- Non standart pumps
| Product name | Product code | On stock | Price | Quantity | |
|
Transmission disc 230911 | 230911 | 0 |
|
|
|
|
Transmission disc 236989 | 236989 | 0 |
|
|
|
|
Cup tapered roller bearing 658997 | 658997 | 0 |
|
|
|
|
Cup tapered roller bearing 742240 | 742240 | 0 |
|
|
|
|
Bearing 2230858 | 230858 | 0 |
|
|
|
|
Bearing 225842 | 225842 | 0 |
|
|
|
|
Bearing 230855 | 230885 | 0 |
|
|
|
|
Bearing 230860 | 230860 | 0 |
|
|
|
|
Needle bearing 230886 | 230886 | 0 |
|
|
|
|
Bearing 231779 | 231779 | 0 |
|
|
|
|
Bearing 233390 | 233390 | 0 |
|
|
|
|
Tapered roller bearing 239931 | 239931 | 0 |
|
About us
UAB Hidraulinės sistemos started its activities in 1998. The company employs a team of 40 experienced people. UAB Hidraulinės sistemos serves companies in all industries, supplies hydraulic components, performs repair and maintenance services, provides production solutions. The company's goals are to modernize the provided services, improve the efficiency of solutions, and the well-being of customers and employees.
Our contacts
UAB 'Hidraulinės sistemos'Comapny code: 135197697
VAT code: LT351976917
Address: Vandžiogalos pl. 106P,
Domeikava, LT54358 Kaunas.
Bank IBAN Nr. LT10 4010 0425 0029 6452
Working hours
- Monday 08.00 - 17.00
- Tuesday 08.00 - 17.00
- Wednesday 08.00 - 17.00
- Thursday 08.00 - 17.00
- Friday 08.00 - 16.00
- Saturday -
- Sunday -